| Customization: | Available |
|---|---|
| CAS No.: | 25037-45-0 |
| Formula: | C16h18o5 |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Industry-leading Audited Factory
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Material Technical Datasheet | ||||
| PC FRG6 K0 | ||||
| FEATURES | APPLICATIONS | |||
| Good surface | Electronic and electrical applications | |||
| Dimensional stability | CD/DVD internal holder | |||
| Good mechanical performance | Internal structure of OA equipment | |||
| High rigidity | Imaging device housing | |||
| Low warpage | Computer plug | |||
| High temperature resistance | Precision molding applications | |||
| Properties | Test Standard | Test Condition | Units | Typical Values |
| Physical Properties | ||||
| Specific Gravity | ISO 1183 | 23ºC | g/cm³ | 1.42 |
| Shrinkage Rate | ISO 2577 | % | 0.2~0.4 | |
| Ash Content | ISO 3451 | 825°C 40min | % | 30 |
| Mechanical Properties | ||||
| Mechanical Properties | Test Standard | Test Condition | Units | Data |
| Tensile Strength | ISO 527 | 10mm/min | Mpa | 115 |
| Elongation at Break | ISO 527 | 10mm/min | % | 5 |
| Flexural Strength | ISO 178 | 2.0mm/min | Mpa | 180 |
| Flexural Modulus | ISO 178 | 2.0mm/min | Mpa | 8000 |
| Cantilever notch impact | ISO 180 | 23°C 4.0mm | J/m2 | 12 |
| Cantilever beam impact without notch | ISO 180 | 23°C 4.0mm | J/m2 | 50 |
| Thermal Properties | ||||
| Thermal Properties | Test Standard | Test Condition | Units | Data |
| H.D.T | ISO 75 | 1.8MPa 4.0mm | ºC | 144 |
| Electrical Performance | ||||
| Electrical Performance | Test Standard | Data | Units | |
| Volume resistance | IEC 60093 | 1E15 | Ω | |
| Insulation Strength 1.6mm | IEC 60243 | 26 | KV/mm | |
| Flame Retardancy | ||||
| Flame Retardancy | Test Standard | Data | ||
| Fire Rating Full Color 1.5mm | UL94 | V-0 | ||
| Fire Rating Full Color 3.0mm | UL94 | V-0 | ||
| UL | ||||
| Flame Retardancy | Test Standard | Data | Units | |
| Fire Rating Full Color 1.5mm | UL94 | V-0 | ||
| Fire Rating Full Color 3.0mm | UL94 | V-0 | ||
| HWI Full Color 1.5mm | UL 746A | 0 | PLC | |
| HWI Full Color 3.0mm | UL 746A | 0 | PLC | |
| HAI Full Color 1.5mm | UL 746A | 4 | PLC | |
| HAI Full Color 3.0mm | UL 746A | 4 | PLC | |
| RTI Elec 1.5mm | UL 746B | 80 | °C | |
| RTI Elec 3.0mm | UL 746B | 80 | °C | |
| RTI Imp 1.5mm | UL 746B | 80 | °C | |
| RTI Imp 3.0mm | UL 746B | 80 | °C | |
| RTI Str 1.5mm | UL 746B | 80 | °C | |
| RTI Str 3.0mm | UL 746B | 80 | °C | |
| CTI | IEC 60112 | 5 | PLC | |
| Injection Molding | ||||
| Injection Molding | Units | Data | ||
| Drying Temperature | ºC | 110~120 | ||
| Drying Time | h | 4~6 | ||
| Front Temperature | ºC | 230~260 | ||
| Middle Temperature | ºC | 240~290 | ||
| Temperature of The Third Section | ºC | 250~320 | ||
| Melting temperature | ºC | 230~320 | ||
| Maximum melting temperature | ºC | 330 | ||
| Mold Temperature | ºC | 80~120 | ||
| Injection speed | Medium and low speed | |||
){kind=link}